Hyperbaric Chambers for Oxygen Therapy has been one of the most useful tools in modern medicine. They have been used to treat many medical conditions and even prevent them. Hyperbaric chambers have been a staple of military, search-and-rescue, and other emergency health services for many years. Hyperbaric chambers are commonly used for extended stays in potentially life threatening situations.
There are two kinds of hyperbaric chambers: Home Barriers and Commercial Barrier systems. The home barrier is a simple plastic door that seals off the unit while inside. The commercial barrier is a rigid, vinyl-lined door that is open in front of the customer and prevents the pressurized gas from entering the interior of the chamber. Both of these models are designed to be opened and closed using a remote control, switch, or button. There is typically a small window above each door.
Most hyperbaric chamber manufacturers offer an emergency oxygen generator, which is essentially a portable compressor that can be added to the emergency oxygen system that comes with most units. This makes it possible for Hyperbaric patients to have their own oxygen generator during an emergency without having to rely on an outside source. This additional cost may actually be a good investment. An emergency oxygen generator can save lives.
A major benefit of the hyperbaric chamber is its ability to increase the level of oxygen in any oxygenated environment. There are several test systems available. The highest rated system is the Viaflow System, which is considered the best test system on the market. Viaflow test systems provide oxygenation levels up to five hours beyond what is safe for human breathing. The system uses a sensor to determine the air pressure in the chamber. When this pressure is detected, an audible alarm will sound, signaling the need for additional oxygen.
Other Hyperbaric Chamber test systems use sensors to indicate the rate of oxygen flow and the amount of total pressure. These systems are also available five years and beyond. However, those five years are considered low risk operations.
The other common method for producing oxygen in a hyperbaric chamber is through the use of pressurized gases. One popular type of these chambers is the hyperbaric oxygen generator. This unit utilizes a pressurized gas such as pure oxygen to generate hyperbaric oxygen. These chambers are commonly used in hospitals, research facilities, aviation, and military applications. Some of these chambers have a capacity of up to five pounds of compressed oxygen.
In addition to the pressure gauge, one of the most valuable tools in the hyperbaric chamber is the ultrasound or magnetic energy probe. This probe has the ability to detect changes in magnetic fields. It works to measure the differences between areas where there is and no pressure. The presence of bubbles containing a different amount of hydrogen peroxide may indicate that the area contained a different oxygen concentration. These bubbles will slowly merge over time, until the pressure in the chamber equals that in Earth's atmosphere.
While the hyperbaric chamber offers a permanent storage solution for dried materials, it is important to follow the manufacturer's instructions to prevent damage to items contained within the hbot. These instructions are typically provided with each unit and are usually found on the box or document that the hyperbaric gas supplier provides. Most suppliers will include a manual for their hbot. Some manufacturers offer online manuals. If there are no manuals or documentation provided with the hyperbaric system, contacting the manufacturer directly to obtain the necessary information is recommended.
For an individual who will be filling the chamber only a few times a year, it is recommended that the unit is packed with the dry ingredients at the beginning and at the end of each month. Typically, the individual will place the box inside a plastic bag prior to placing the ingredients inside. After placing the ingredients within the bag, the individual should place the box in the hyperbaric chamber, set the pressure to the recommended level and allow the contents to remain in the chamber for the recommended period.
Prior to placing the samples in the hyperbaric chamber for testing, the samples should be washed and sanitized to prevent contamination. Some types of samples, such as those containing powdered wood or sand, should be left to air dry on their own. If not dried and sanitized, contamination may occur within a year. For other samples, such as glassware or ceramic material, the best quality products for this purpose are those offered by an approved testing laboratory. These types of products have been subjected to rigorous testing and meet or exceed all standards set forth by the Food and Drug Administration.
The manufacturers of these type of hyperbaric chambers understand that contamination from these chemicals present in the chamber can occur if the pressure ever falls below the recommended levels. Therefore, they offer models that operate at different levels of pressure. The lower the pressure, the less likely contamination will occur. In order to reduce the chances of contamination occurring, the recommended storage pressure is around one hundred and twenty pounds per square inch.
Copyright © HyperbaricPros.com
